Dukane ULTRASONIC GENERATOR/POWER SUPPLY LS 403-574-01 - Manual (Page 84)

Page 7
iQ Series ,
Ultrasonic Generator/Power Supply LS User’s Manual
Dukane Manual Part No. 403-574-01
MPC Interface Installation Guide
The MPC interface is designed for assembly systems
where one ultrasonic generator is sequenced to as many
as 16 ultrasonic probes.
The MPC interface is typically supplied as a stand-alone
bench-top unit, or as a component that can be mounted in
a through-panel configuration.
No special installation is needed for a stand-alone MPC
interface that can be put on a bench top or a shelf.
Use the following installation recommendations for a
panel mounted MPC interface.
A
C
C/2
D
0.25
[6.35]
(6 PLCS)
MPC0402 7.12 1.75 6.75 2.25
[181 mm]
MODEL "A" "B" "C" "D"
[45 mm] [171.5 mm] [57.2 mm]
MPC0806 10.88 1.75 10.50 2.25
[277 mm] [45 mm] [266.7 mm] [57.2 mm]
MPC1610
18.25 1.75 18.00 2.25
[464 mm] [45 mm] [457.2 mm] [57.2 mm]
MPC0404
MPC0808
MPC1612
MPC1614
MPC1616
Cut Outs
For panel mounted modules:
Use Figure 10-6 below to determine the size of the
cutout needed for your equipment panel.
Make the appropriate cut, and install the MPC interface
securing the mounting flange to the equipment panel
before continuing with the cable connections.
Figure 10-6 MPC Module Cutout Guide