Tftp/ftp upgrade, Account settings, Reset to default – Xblue Networks X-44 User Manual
Page 80

Select Public Phonebook CSV File to Update
• After entering your private phonebook entries, you may create a backup to keep your phonebook
entries safe.
Select Voice Tar File to Update
• Since all of the voice prompts are in a single “indexed” file, this upgrade may not be common.
Select Logo File to Update (113x20 pixels)
• This is the logo that appears in the X-44 LCD Display. The file must be 113 pixels wide and 20
pixels tall. Then it must be converted, by using a special application (tcbmp.exe) to a special type
“bmp” file that can be uploaded to the X-44 telephone.
TFTP/FTP Upgrade
A different way to upgrade a phone is to create a temporary “TFTP” server.
• Download and install the “TFTP” application on your PC
• Set the TFTP Server to 192.168.10.11 and set it up to be the DHCP Server
• Power up the X-44 telephone while holding down the first “Soft Button” (left button directly under
the LCD)
• Press the center check button on the telephone to begin the download, which will take about 3
minutes. This method does not allow for a configuration backup.
Account Settings
• Each telephone has two different accounts - Admin, which gives you access to all of the
programming parameters and the User, which limits access to specific pages. For example, a “User”
has no access to the software upgrade page, specific parts of the SIP page, and cannot reassign
the Admin or User passwords.
Reset to Default
It may require that the X-44 telephone be isolated in order to fully default the system back to factory
default. The best way to accomplish this is to unplug the network cable, and then restore it back to
factory default. Once that is complete reconnected the X-44 to your existing network.
• Reset Configuration - Select Reset Configuration to default the configuration of the X-44
telephone.
• Reset Phonebook - Select Reset Phonebook to default the private and public phonebook back to
factory default.
• Reset All - Select Reset All to completely default the X-44 back to factory default.
Web Programming
80