Spectrum Controls 1771sc-IFE32 User Manual
Page 20
![background image](/manuals/742152/20/background.png)
10 PLC-5
TM
32-Channel Analog Input Module
Input 1-
Input 2-
Input 3+
Input 4+
Common Group 1
Input 5-
Input 6-
Input 7+
Input 8+
Common Group 2
Input 9-
Input 10-
Input 11+
Input 12+
Common Group 3
Input 13-
Input 14-
Input 15+
Input 16+
Common Group 4
Input 1+
Input 2+
Input 3-
Input 4-
Common Group 1
Input 5+
Input 6+
Input 7-
Input 8-
Common Group 2
Input 9+
Input 10+
Input 11-
Input 12-
Common Group 3
Input 13+
Input 14+
Input 15-
Input 16-
Common Group 4
-
-
-
-
2-Wire
Transmitter
2-Wire
Transmitter
Power
Supply
Power
Supply
Source Ground
Connection Diagram for 16 Differential
Inputs and Two-wire Transmitters
All unsed inputs should have their + and - inputs tied together
and to Commons to reduce noise. Tie power supply grounds
together to minimize ground loops.
Attention: This signal must be between +14.5V and common voltage
otherwise channel-to-channel cross talk can cause invalid input
readings and invalid under or over range readings.
The sensor cable must be shielded. The shield must extend
the length of the cable to the point of termination.
+
+ +
+
Input 1-
Input 2-
Input 3+
Input 4+
Common Group 1
Input 5-
Input 6-
Input 7+
Input 8+
Common Group 2
Input 9-
Input 10-
Input 11+
Input 12+
Common Group 3
Input 13-
Input 14-
Input 15+
Input 16+
Common Group 4
Input 1+
Input 2+
Input 3-
Input 4-
Common Group 1
Input 5+
Input 6+
Input 7-
Input 8-
Common Group 2
Input 9+
Input 10+
Input 11-
Input 12-
Common Group 3
Input 13+
Input 14+
Input 15-
Input 16-
Common Group 4
+
-
+
-
Source Ground
Connection Diagram for 16 Differential
Inputs and Four-wire Transmitters
All unsed inputs should have their + and - inputs tied together
and to Commons to reduce noise. Tie power supply grounds
together to minimize ground loops.
Attention: This signal must be between +14.5V and common voltage
otherwise channel-to-channel cross talk can cause invalid input
readings and invalid under or over range readings.
The sensor cable must be shielded. The shield must extend
the length of the cable to the point of termination.
4-Wire
Transmitter
4-Wire
Transmitter
Power
Supply
Power
Supply