Spectrum Controls 1746sc-CTR4 - Manual (Page 18)

18
ControlLogix ™ Counter Module
Labeling And Re-
Installing The
Terminal Block
(if it is removed)
The supplied label is mounted on the module door. This label helps
ensure that the terminal block is wired correctly for the module.
Once you have wired your module and properly labeled install the
terminal block on your module:
1. Align the terminal block with the receptacle.
2. Insert the terminal block and press firmly at the top and bottom until it
is properly seated.
3. Screw in the two retaining screws on the top and bottom of the
terminal block.