SpectraCal VMWare Fusion - Manual (Page 2)

17544 Midvale Ave. N. Ste 100, Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
On the Fusion Settings page:
Click Processors & Memory.
A. Select one-half the total number of available processor cores. This leaves half of the
processor cores available to the Mac side to handle the IO and GPU.
B. Select at least half of the available RAM, with a minimum of 4 GB (4000 MB).
C. Under the Advanced Options, don't enable any options.
Click Display.

Set Accelerate 3D Graphics to ON.
Click Network Adapter.

Under Bridged Networking, select Autodetect.
Click Hard Disk.

Make your virtual disks a fixed size, not auto sized (avoids auto sizing performance
penalty).
Note: When using a Bootcamp virtual machine, the disk is always a fixed size.