SpectraCal EIZO ColorEdge - Manual (Page 18)

17544 Midvale Avenue N., Suite 100, Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
In the Post Calibration section of the SI Advanced Calibration workflow, step through the following
pages to check and document the Eizo monitor calibration:
a. Post Calibration Settings
If you wish to document the monitor’s control settings after calibration, you can record that
information on this page. This information will then be available on a calibration report.
b. Post Calibration View
If you wish to document the monitor’s performance prior to calibration, you can do that on this
page. This information will then be available on a calibration report.
DONE – You are done with the 1D LUT/CMS/ICC monitor calibration for an EIZO monitor that is not
normally connected to a computer’s standard graphics adapter output.