Palram PALSU - Manual (Page 3)

PALSUN® Technical Guide
3
PALSUN® Product Range
Some of the products' features below can be combined. Please contact your Palram dealer for further information.
Product Description Features & Applications
PALTUF®
UV stabilized, general purpose, flat solid
polycarbonate sheet.
Recommended for indoor use only.
PALSUN®
Flat solid polycarbonate sheet with UV protective
layer on one side.
Suitable for both exterior and indoor applications.
Optional surface textures:
ƒ Embossed (E-102)
ƒ Prismatic
ƒ Hair-cell
ƒ Matte - Anti-glare effect
PALSUN® UV2
Flat solid polycarbonate sheet with UV protective
layer on both sides. Recommended for applications that involve UV exposure on
both sides (e.g. exterior light boxes)
PALSUN® FR
Sheet with higher fire resistance rating
(e.g. UL 94 V-0).
Recommended for applications in populated areas.
PALSUN® Solar Control
Sheet with integrated heat-blocking layer. This
metallic reflective layer that transmits less Infrared
radiation and reduces heat buildup.
Available with 20, 35, or 50% light transmission.
PALSUN® Breeze
This advanced heat-blocking SolarSmart™ tint
offers a clear view due to its high clarity. Can be tailored to achieve different light and heat
transmissions.
PALGARD™
Sheet with abrasion resistant layer on one or both
layers.
Recommended for applications in high traffic areas, harsh
chemical environments or those requiring anti-vandal
properties.
Notes:
1. All the above sheets are supplied with a protective polyethylene (PE) film on both sides (one side upon request), with the UV protected side clearly marked. This film
should be removed immediately after installation.
2. For transportation, handling and storage instructions and recommendations, please refer to
Handling and Storage Guidelines for Palram Sheets .
3. PALSUN sheets are backed by a 10 years limited warranty, available upon request.
4. Most PALSUN sheets are available in the transparent, translucent or opaque form, in a variety of colors, either standard or custom ordered.
Standard Dimensions*
Surface Finish
Thickness (mm)
Width x Length
(mm)
Smooth
Both sides
Embossed
Both sides
Matte
One side
Hair Cell
One side
Prismatic
One side
1
1220 x 2440
1250 x 2440
✔ ✔
1.5 ✔ ✔ ✔
2
1220 x 2440
1250 x 2440
2050 x 3050
✔ ✔ ✔
2.5 - 6 ✔ ✔ ✔ ✔ ✔
8 ✔ ✔ ✔
9 - 12.7 ✔ ✔
2 - 18 2450 x 3050 ✔
*Other dimensions and specifications are available upon request, subject to a minimum order.