LINK Systems OmniLink - Feed Interface - Manual (Page 9)

OmniLink 5000 Feed Manual December 13, 1999
2.3
Manual Rev 2.3
2.4 Coe BG2 Interface
The connection to a Coe BG2 Electronic Feed is
as follows:
Table 2.2
Coe BG2 Connections
Link PN 106739
OmniLink
Feed Port Function /
Color Coe COM2
port
Pin 1
(GND) Ground
(WHITE) Pin 7
Pin 2
(RXD) Receive data
from feed
(BLACK) Pin 2
Pin 3
(TXD) Transmit data to
feed (RED) Pin 3
Notes:
‚ The COM2 port is located on the Coe operator
interface terminal
‚ the COM2 port requires that pins 6, 8, and 20
(of COM2) be connected together.
‚ The feed communications settings (as set in the
Coe operator terminal) should be 9600 Baud, 7
data bits, Odd parity, 1 stop bit.
‚ The feed will not communicate when in an error
condition or when in a parameter entry screen
(setting length, speed, acceleration, etc).