LINK Systems OmniLink - Feed Interface User Manual

Page 14

OmniLink 5000 Feed Manual

December 13, 1999

2.8

Manual Rev 2.3

2.11

Dallas Feed Interface (EXOR Control)

The connection to a Dallas feed with EXOR

control is as follows:

Table 2.10

Dallas (EXOR Control) Connections

Link PN 107865

OmniLink
Feed Port

Function / Color

Dallas
Comm Port
DB-15 Male

Pin 1
(GND)

Ground (WHITE)

Pin 5

Pin 2
(RXD)

Receive data
from feed
(BLACK)

Pin 3

Pin 3
(TXD)

Transmit data to
feed (RED)

Pin 2

No
Connect

Shield (BARE)

Pin 1

Pins 10 and
11 Jumpered
Together

Notes:

This feed uses the Reliance IQ2000/IQ5000
feed setting.

Speed and acceleration should be set as
“Unitless” in the Link feed setup screen.

2.12

Emerson Servo Interface

The connection to an Emerson Electronic Feed

is as follows:

Table 2.11

Emerson Connections

Link PN 105721