HITEC X1 MF: AC/DC, 80-Watt, Multi-Function, Charger - Manual (Page 27)

˚ 3 seconds
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
Press
Dial
26
X1 MF
TVC=YOUR RISK!
4.20V
TEMPERATURE
CUT-OFF 50C
SAVE PROGRAM
ENTER
BATT MEMORY [1]
LiPo 7.4V(2S)
BATT MEMORY [1]
C:4.3A D:2.2A
PROGRAM SELECT
BATT MEMORY
ENTER CHARGER
LOAD....
Set the process termination voltage. Range: 4.18V -
4.30V. CAUTION: be sure to set/verify the correct
end voltage of the type of cell you are charging.
Over charging batteries can result in fire or
explosion!
If you are using the optional external Temperature
Sensor, set the temperature cutoff. If you are not
using the Temperature Sensor, leave this setting
as-is.
Save the program entry by pressing and holding the
dial for 3 seconds.
Once saved, the display will return to the newly
saved programs entry in the saved program list.
To recall a saved program, press Mode/Stop, scroll
to the Program Select Batt Memory screen and
press the dial.
Rotate the dial through the saved memory slots until
you find the memory you are trying to activate.
Once located, press and hold the dial for 3 seconds.
This screen indicates that the memory you have
selected is being loaded and activated.