HITEC X1 MF: AC/DC, 80-Watt, Multi-Function, Charger - Manual (Page 26)

25
X1 MF
˚ 3 seconds
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
Press
Dial
BATT MEMORY [1]
ENTER SET
BATT TYPE
LiPo
BATT VOLTS
7.4V(2S)
CHARGE CURRENT
4.3A
DSCH CURRENT
4.9A
DSCH VOLTAGE
3.0V/CELL
The charger can store up to 10 different charge/discharge profiles for
your convenience, and the stored profiles can be recalled quickly without
having to go through the setup process.
Enter the battery memory program, you can change
the battery type (LiPo, LiFe, LiIon, NiMH, NiCd, Pb
battery), voltage, and charge current by pressing
the Start/Enter dial to make the value blink, then
rotate the dial clockwise or counterclockwise to alter
the value, and repress the dial to store the value and
move to the next value or screen. Note:The battery
used for this example is a 2S, 7.4V LiPo battery.
Enter the battery voltage, also represented by the
number of cells in series (S).
Adjust the charge current. Range: 0.1A - 10A.
Adjust the discharge current. Range: 0.1A - 5.0A.
Adjust the discharge voltage. Range: 3.0 - 3.3 volts
per cell.