Hanna Instruments HI 3512 - Manual (Page 38)

38
Notes: • Buffers (standards) displayed in video inverse mode are
from previous calibrations (pH and ISE range only).
• The pH custom buffers are marked with an “ *” on the
right side of the buffer value.
LAST RELATIVE mV CALIBRATION DATA
Last Relative mV calibration data is stored automatically after a successful
calibration.
To view the Relative mV calibration data, press
GLP key while in Relative
mV measurement mode.
The instrument will display the Relative mV GLP information: calibration
date, time and offset.
LAST ISE CALIBRATION DATA
Last ISE calibration data is stored automatically after a successful
calibration.
To view the ISE calibration data, press
GLP function key while in ISE
measurement mode. If GLP function key is not displayed press MENU
key.
The instrument will display the ISE calibration information: calibration
date, time, slope, calibration status and electrode type.