Glow-worm Flue - Manual (Page 17)

0020095198_02 - 06/11 - Glow-worm
INSTALLATION
- 17 -
6.3 blacK Terminal Kit Ø60/100
Check the contents of your kit.
Part no. a2043700
The Black Terminal kit will fit either the telescopic or standard
horizontal flue systems and can be fitted after
the appliance and flue have been installed.
6.4 Installation
(a) Using a 8mm flat screwdriver to release the catch.
(b) Withdraw the flue terminal and pipe from the duct.
(c) Remove the flue pipe from the terminal, twist and pull,
discard the terminal.
(d) Locate the “notch” on the pipe, align with the “catch” on the
Black terminal and push the pipe into position, ensuring that the
engagement is secure.
(e) Fit the rubber collar.
Push the flue duct and terminal into the air duct make sure the
seals fit tightly. noTe: the seam of the air duct must be at the
top.