beautypg.com

EXFO FTB-7000 OTDR for FTB-200 v2 User Manual

Page 61

background image

Testing Fibers in Advanced Mode

OTDR

47

Setting Distance Range, Pulse Width, and Acquisition Time

To set the parameters:
From the OTDR tab:

³

Press the dial corresponding to the parameter you wish to set (the
selection marker will move clockwise) or use the selection dial located
on the front of the unit.

OR

³

Press directly the value to select it. The selection marker will go to that
value immediately.

If you want the application to provide automatic acquisition values, move
at least one dial to the Auto position. The other dials are automatically set
accordingly.

Note: If your OTDR supports singlemode, singlemode live, or multimode

wavelengths, settings would be applied to either singlemode, singlemode
live, or multimode wavelengths, depending on the selected fiber type
(same settings for 50 μm and 62.5 μm).

Parameters setting dials

Selection
marker