EXFO FTB-7000 OTDR for FTB-200 v2 - Manual (Page 200)

Creating Reports
186 FTB-7000 Series
Generating a Report
The application will keep in memory the items you have included in your
reports for future use.
Pass/Fail thresholds: loss, reflectance, fiber section
attenuation thresholds as they are defined in OTDR
setup, under Event table.
Note: Selecting this item will not highlight the
failed results in the report. You must
select the Mark faults in event table
feature from the OTDR setup and include
the Event table item in your report.
By default, this item is selected if you selected the
Mark faults in event table feature from the OTDR
setup. Otherwise, the item will be unavailable.
X X X
Graph: You can select the Zoom item if you want the
traces to be printed with the zoom factor you selected:
³
Manual zoom: Graphs will be printed exactly as
they appear on screen. The same zoom factor will
be applied to all traces (wavelengths) of a
particular file.
³
Zoom on selected event: Graphs will be printed
with zoom on the area corresponding to the
selected event (one event per trace, that is, one
per wavelength).
By default, this item is selected.
X X X
Item appearing on the report
Auto
mode
Advanced
mode
Template
mode