EXFO FTB-7000 OTDR for FTB-200 v2 - Manual (Page 195)

OTDR 181
13 Creating Reports
For future reference, you can add notes on the location of the tested fiber,
type of job performed and general comments related to a trace in trace
reports.
Adding Information to the Test Results
After acquiring a trace, you might want to include or update information
about the tested fiber and job or add comments. The information you enter
is saved only for the currently open trace file.
After entering the required data, you may save the contents as a template.
The next time you access the report to add information to a newly acquired
trace, the template is automatically recalled, eliminating repetitive
documentation operations.
Note: The information must be entered before acquiring traces in Template
mode. For more information, see Testing Fibers in Template Mode on
page 61.
Some of the information is common to all wavelengths (location A and B,
cable ID and fiber ID). Some other is specific to the current wavelength
(job ID, operators A and B, company, customer and comments). If you
clear information from the Report window, both the common and the
specific information will be deleted. The information specific to other
wavelengths will not be deleted (you must delete it manually).