EXFO FTB-7000 OTDR for FTB-200 v2 - Manual (Page 275)

Analyzing Traces with the Bidirectional Analysis Application
OTDR 261
Adding Information to the Test Results
Adding Information to the Test Results
You might want to include or update information about the tested fiber and
job or add comments to the A->B or B->A traces. This information will be
included in the reports that you will create (see Creating Reports on
page 263). The information you enter is saved along with the bidirectional
file only. The original A->B or B->A files will not be modified.
The information that you enter is specific to each wavelength and direction
combination (for example, the information for A->B trace at 1550 nm
differs from the information for A->B trace at 1625 nm).
The bidirectional measurement uses the information defined for the A->B
trace.
To add information to the test results:
1. From the main window, select the Trace Info. tab.
2. Under Direction, select A->B or B->A.
3. Press the Trace Identification button.