EXFO FTB-500 (Window XP) - Manual (Page 154)

Managing Data
144 FTB-500
Connecting to a Wireless Network
7. From the Wireless Network Connection window, select the wireless
network to which you want to connect.
8. Tap Connect.
9. If the network is protected by a network key (password) enter it in the
corresponding boxes and tap Connect.
Note: Since all networks are different, you may also need to configure other
parameters before being able to transfer data via Wi-Fi. For information on
the configuration specific to your network, see with your network
administrator.
As soon as the connection is established, you can start working with the
selected wireless network. When you have finished, from the Wireless
Network Connection window, tap Disconnect to stop communication
with the wireless network.