EXFO AXS-200 SharpTESTER - Manual (Page 56)

Troubleshooting
48 AXS-200
LED Statuses
LED Statuses
The power and battery LEDs are used to indicate specific statuses of your
unit. If you notice that one of the LEDS displays a particular status, look in
the tables below to see what could be causing it.
Battery LED Status
The battery status LED is
red.
³
Battery door is open.
³
Battery is defective.
³
Close the battery door
completely.
³
Contact EXFO or replace
the battery.
The unit is not responding. Shut down the unit by
pressing and holding it
down.
You will hear a first beep;
release the key after you hear
a second beep.
Turn the unit on again to reset
it.
Battery LED
Status
DC In Unit
Battery
Door
Battery
Battery
Status
Battery Level
Green Plugged - Closed Present OK Full
Green,
blinking
Plugged - Closed Present OK Not full / Low
/ Empty
Green,
blinking
Plugged Off Open Present OK Not full / Low
/ Empty
Yellow,
blinking
Unplugged On Closed Present OK Low
Problem Possible Cause Solution