EXFO AXS-200 SharpTESTER - Manual (Page 36)

Using a Probe on your AXS-200 SharpTester
28 AXS-200
Setting Probe File Storage Options
Setting Probe File Storage Options
The files are saved using an autonaming scheme. You can select the name
or prefix, the number where the incrementation starts and the graphic file
format (jpg or bmp) used to save the picture.
To set the file storage options:
1. Press ,
then Probe.
2. Use the (F1/F2/F3 key) to select the
Storage tab.
3. Use the up/down arrow keys to
select the item to modify:
³
To modify the filename or
prefix, highlight the latter using
the arrow keys, then press
.
Use the keypad to enter the new name, then press again to
validate it.
³
To modify the number at which the autosaving process will begin,
highlight the latter using the arrow keys, then press
. Use the
keypad to enter the desired number, then press again to
validate it.
³
To modify the file format or suffix, highlight the latter using the
arrow keys, then press
. Select the new format (the current
selection is indicated with a black dot), then press again to
validate it.