EXFO AXS-200 SharpTESTER - Manual (Page 52)

Maintenance
44 AXS-200
Restoring Your Unit to Normal Operation
To restore module application from recovery image:
1. Shut down your unit by pressing
and holding it down until the unit
beeps twice.
2. Press simultaneously and to enter the maintenance mode. The
window will be displayed after about 30 seconds.
3. Select Restore Module Application From Recovery Image.
4. When the application prompts you, select Yes to start the process.
Your unit may restart several times during the installation.
If the operation was successful, you can now use your unit. If your unit still
does not work properly, try restoring the system partition.
To restore the system partition:
1. Shut down your unit by pressing
and holding it down until the unit
beeps twice .
2. Press simultaneously and to enter the maintenance mode. The
window will be displayed after about 30 seconds.
3. Select Restore System Partition.
4. When the application prompts you, select Yes to start the process.
5. Once the process is complete, reinstall the system disk and your
applications using HISM.
Your unit may restart several times during the installation.
If the operation was successful, you can now use your unit. If your unit still
does not work properly, try restoring the system partition from a USB
memory drive.