Eurocom M860TU Montebello - Manual (Page 97)

Upgrading The Computer
Upgrading the System Memory (RAM) 6 - 9
6
3. Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
4. Carefully disconnect the fan cable , and remove the cover .
5. Gently pull the two release latches ( & ) on the sides of the memory socket in
the direction indicated below.
8 9
8
8
9
Fan Cable
Make sure you recon-
nect the fan cable
before screwing down
the bay cover.
Figure 6 - 9
Bay Cover Removal
Figure 6 - 10
RAM Module
Release Latches
8
10 11
10 11