Eurocom M860TU Montebello - Manual (Page 82)

BIOS Utilities
5 - 8 Advanced Menu
5
Advanced Menu
Installed O/S (Advanced Menu)
This setting tells the computer what kind of operating system you’re using. Make
sure you choose the correct setting for your O/S in order to prevent system problems.
Note: If you select the Vista O/S then the SATA Mode Selection menu will become
available. If you are installing the Windows XP O/S make sure you have set the ap-
propriate operating system here in order to prevent system problems.
Figure 5 - 3
Advanced Menu
SATA Mode & eSata Port
The eSATA port will be en-
abled if you have selected
AHCI mode in SATA Mode
Selection.
Note that the Intel Matrix
Storage driver is required
to enable e-SATA port
hot-swapping (see page
7
- 33 ).
Intel Turbo Memory
Select AHCI mode in Sata
Mode Selection if you
have included an Intel Tur-
bo Memory module in your
purchase configuration.
Main Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
Select the operating
system installed
on your system which
you will use most
commonly.
Note: An incorrect
setting can cause
some operating
systems to display
unexpected behavior.
Phoenix SecureCore(tm) Setup Utility
Installed O/S: [ VISTA ]
SATA Mode Selection: [AHCI]
DFOROM (Robson) Support: [Enabled]
Legacy USB Support: [Enabled]
Boot-time Diagnostic Screen: [Disabled]
Legacy OS Boot: [Enabled]
Reset Configuration Data: [No]
Power On Boot Beep [Disabled]
Battery Low Alarm Beep [Enabled]
Fan Control: [Automatic]
Only available if Windows Vista
is selected as the O/S.