Eurocom M860TU Montebello - Manual (Page 198)

Windows XP Information
D - 24 Driver Installation
D
Updating/Reinstalling Individual Drivers
If you wish to update/reinstall individual drivers it
may be necessary to uninstall the original driver.To do
this go to the Control Panel in the Windows OS and
double-click the Add/Remove Programs item. If you
see the individual driver listed (if not see below), un-
install it, following the on screen prompts (it may be
necessary to restart the computer). Go to the appropri-
ate section of the manual to complete the update/rein-
stall procedure for the driver in question.
If the driver is not listed in the Add/Remove Pro-
grams item:
1. Click Start (menu), point to Settings and click Control
Panel (or click Start > Control Panel).
2. Double-click System (icon); System (icon) is in
Performance and Maintenance (category).
3. Click Hardware (tab) > Device Manager (button).
4. Double-click the device you wish to update/reinstall the
driver for (you may need to click “+”).
5. Look for the Update Driver button (check the Driver
tab) and follow the on screen prompts.
Windows XP Service Pack 2
Make sure you install Windows XP Service Pack 2 (or a
Windows XP version which includes Service Pack 2) be-
fore installing any drivers. Service Pack 2 includes sup-
port for USB 2.0.
If you have upgraded the system by installing Service
Pack 2 (i.e. your Windows XP version does not include
Service Pack 2) then follow these instructions:
1. Click Start (menu), point to Settings and click Con-
trol Panel (or click Control Panel).
2. Double-click System (icon); System (icon) is in Per-
formance and Maintenance (category).
3. Click the Hardware (tab) > Device Manager (but-
ton).
4. Click “+” next to Other Devices (if its sub-items are
not shown).
5. Right-click Universal Serial Bus (USB) Controller
and select Uninstall > OK (if you don’t see the item
then there is no need to take any further action).
6. Restart the computer and it will find the USB 2.0 con-
troller.