Eurocom M860TU Montebello - Manual (Page 160)

NVIDIA Video Driver Controls
B - 6 Attaching Other Displays
B
Configuring an External Display using the NVIDIA Control Panel
Alternatively you can use the NVIDIA control panel to configure any attached dis-
plays.
1. Attach your external display to the DVI-Out Port or HDMI-Out port, and turn it on.
2. Go to NVIDIA Control Panel (see “NVIDIA Control Panel” on page B - 2 ).
3. Click Display, and then click Set up multiple displays.
4. Click to select the nView display mode you wish to use (see page B - 9 ).
5. Select the display(s) you want to use (if your display is not shown click “My Display
is not shown in the list...” or use the Fn + F7 key combination), and choose which
display is to be the primary display.
6. Click Apply > Yes to save the changes.
Figure B - 5
Set Up Multiple
Displays