Eurocom M5 Pro - Manual (Page 220)

Troubleshooting
7 - 10 Problems and Possible Solutions
7
The system freezes or the screen goes
dark.
The system’s power saving features have timed-out
. Use the AC/DC adapter,
press the sleep (Fn + F12) key combination, or press the power button if no
LEDs are lit.
The system never goes into a power
saving mode
.
Power Options features are not enabled. Go to the Windows Power Options
menu and enable the features you prefer (see “Power-Saving States” on
page 3 - 7
). Make sure you have enabled Hibernate mode from the control
panel.
The Wireless LAN/Bluetooth modules
cannot be detected.
The modules are off as the computer is in Airplane Mode.
Check the LED
indicator to see if it is in Airplane Mode (see
“LED Indicators” on page 1 -
7 ). Use the Fn + F11 key combination to toggle Airplane Mode on/off (see
Table 1 - 3, on page 1 - 14 ).
The PC Camera module cannot be
detected.
The module is off. Press the Fn + F10 key combination in order to enable the
module (see “Function Keys & Visual Indicators” on page 1 - 14 ). Run the
camera application to view the camera picture.
The Wireless LAN/Bluetooth modules
cannot be configured.
The driver(s) for the module(s) have not been installed. Make sure you have
installed the driver for the appropriate module (see the instructions for the
appropriate module in
“Wireless LAN Module” on page 6 - 20
and/or
“Bluetooth & WLAN Combo Module” on page 6 - 25 ).
Problem Possible Cause - Solution