Eurocom M5 Pro - Manual (Page 178)

Modules
6 - 44 Intel® Rapid Start Technology Driver
6
9. Type “select disk #” (# is disk number where you want to create the store partition,
so refer to the results obtained from "list disk" for exact disk number).
10. The message “Disk # is now the selected disk.” will appear.
11. Type “create partition primary”.
12. A “DiskPart succeeded in creating the specified partition.” message should
appear.
Figure 6 - 34
Diskpart - Select
Disk #
Figure 6 - 35
Diskpart - Create
Partition