Echelon LonWorks Twisted Pair Control Module - Manual (Page 50)

42 Programming Considerations
Table 15. Hardware Template Values for an FT 5000 Control Module
NodeBuilder Hardware Template
Specification FT 5000
Hardware Tab
Platform Custom
Transceiver Type TP/FT-10
Neuron Chip Model FT 5000
External Clock Speed 10 MHz
Clock Multiplier 8
System Clock 80 MHz
System Image Version Default
Image Name BFT5000
Firmware Version 19
Memory Tab
Off-Chip ROM N/A
Extended Non-Volatile 0x4000 to 0xC7FF
Extended On-Chip RAM 0xC800 to 0xE7FF
I/O N/A
On-Chip ROM 0x0000 to 0x3FFF
On-Chip RAM 0xE800 to 0xEFFF
Mandatory EEPROM 0xF000 to 0xF7FF
Extended On-Chip EEPROM 0
Non-Volatile Memory Type EEPROM
You can specify any of the clock multiplier settings (½ to 8) for the FT 5000
Control Module, so that the system clock runs from 5 MHz to 80 MHz. In
addition, you can specify memory values for extended non-volatile memory and
extended on-chip RAM to appropriate ranges for your application.