Ditch Witch RT45 - Manual (Page 135)

Service - 138
RT45 Operator’s Manual
Service Precautions
CMW
®
Service Precautions
Welding Precaution
Cleaning Precaution
Read operator’s manual. Know how to use all controls
before operating machine. When you see this sign on the machine or
in the manual, read it and use caution. Your safety is at stake.
To help avoid injury:
• Perform all service with engine off unless otherwise instructed.
• Refer to engine manufacturer’s manual for engine maintenance instructions.
• Lower unstowed attachments to ground before servicing equipment.
NOTICE: Welding can damage electronics.
• Disconnect battery at battery disconnect switch before welding to prevent damage to battery.
Do not turn off battery disconnect switch with engine running or alternator and other electronic
devices may be damaged.
• Connect welder ground clamp close to welding point and make sure no electronic components are in
the ground path.
• Always disconnect the ECU ground connection from the frame, harness connections to the ECU,
and other electronic components prior to welding on machine or attachments.
NOTICE: When cleaning equipment, do not spray electrical components with water.