Ditch Witch RT45 - Manual (Page 103)

Backhoe - 104
RT45 Operator’s Manual
Operation
CMW
®
Move Unit
To move unit from the backhoe operator’s station using the ground drive neutral function (standard):
1. Raise stabilizers.
2. Press Ground Drive Neutral switch.
3. Use bucket and dipper to move unit.
4. Lower stabilizers.
To move unit from the backhoe operator’s station using the remote ground drive function (optional):
1. Raise stabilizers.
2. Raise backfill blade.
3. Use remote ground drive switch to move unit.
4. Lower stabilizers.
5. Lower backfill blade.
NOTICE:
• Only use this method to move unit a few feet at one time.
• Only move unit from backhoe operator’s station on level ground.
NOTICE: Only use this method to move unit less than 30 ft (10 m) at one time.