Engine oil temperature chart, Approved fuel, Fx50 operator’s manual – Ditch Witch FXT50 User Manual
Page 78
FX50 Operator’s Manual
Service - 77
Recommended Lubricants/Service Key
CMW
Engine Oil Temperature Chart
See engine manual for more information about oil viscosity and operation in arctic conditions.
Approved Fuel
This engine is designed to run on diesel fuel. Use only high quality fuel meeting ASTM D975 No. 2D,
EN590, or equivalent. At temperatures below 32° F (0° C) winter fuel blends are acceptable. See the
engine operation manual for more information.
Biodiesel blends up to 5% (B5) are approved for use in this unit. The fuel used must meet the
specifications for diesel fuel shown above. In certain markets, higher blends may be used if certain steps
are taken. Extra attention is needed when using biodiesel, especially when operating in cold weather or
storing fuel. Contact your Ditch Witch dealer or the engine manufacturer for more information.
IMPORTANT: Fuel sulfur content should be less than 5000 ppm (0.5%). Worldwide, fuel sulfur
regulations vary widely. Fuel used should always comply with local regulations. If using lube oil meeting
API CJ-4, (or other low SAPS equivalent) and fuel with sulfur content above 15 ppm (0.0015%), ULSD
in the U.S.), reduce oil change interval to 250 hours.
Temperature range anticipated before next oil change