Prepare jobsite, Prepare excavation point, Fx50 operator’s manual – Ditch Witch FXT50 User Manual
Page 45
Prepare - 44
FX50 Operator’s Manual
Prepare Jobsite
CMW
Prepare Jobsite
Prepare Excavation Point
•
Clear the area to be excavated. Remove rocks or branches too large for vacuum hose.
•
If excavating fluids while drill string is moving, clear area of trees, shrubs, and weeds.
•
Select a solid area to stand on while excavating.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
To help avoid injury:
•
If jobsite classification is in question or if the possibility of unmarked electric utilities exists, classify
jobsite as electric.
•
Expose lines by hand before digging. Cutting high voltage cable can cause electrocution.
•
All vegetation near operator’s station must be removed. Contact with trees, shrubs, or weeds during
electrical strike could result in electrocution.