Ditch Witch FXT50 - Manual (Page 66)

FX50 Operator’s Manual
Vacuum and Pothole - 65
Unload to Another Tank
CMW
5. Move valve handle counterclockwise to engage “reverse flow” mode and start engine. Material will flow
into offboard tank.
6. Increase throttle as desired to transfer material.
7. When transfer is complete, throttle down completely and turn off engine. Close FX tank drain/outlet
valve.
8. Close offboard tank inlet valve and disconnect hose from offboard tank inlet valve.
9. Move handle clockwise to “vacuum” mode and turn on engine.
10. Open FX tank drain/outlet valve. Material will empty from transfer hose.
11. Close FX tank drain/outlet valve, throttle down and turn off engine.
12. Disconnect transfer hose from FX tank.