Ditch Witch FXT50 - Manual (Page 62)

FX50 Operator’s Manual
Vacuum and Pothole - 61
Pothole
CMW
6. Adjust water pressure as needed to match soil conditions and/or material of utility being exposed.
7. Ensure that water sprays from nozzle in a fan pattern. If it does not, nozzle may be clogged and pump
will not function properly. Clean or replace nozzle as necessary.
8. When freshwater tank is empty, stop operation and turn water pump switch to off.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
To help avoid injury: Test water pressure on a sample of the material to be located. Adjust
pressure until no damage occurs to the material. High pressure water can cut utility lines.
NOTICE: Do not continue to operate with freshwater tank empty. Running water pump with no
water will damage pump.