Cino FA470 - Manual (Page 96)

Command Descriptions
2-81
Parameter(s)
< Table 5-5-3 > Reply Bluetooth Parameter(s) Field
Parameter / PID / Size Options Descriptions
Bluetooth Device Name
(F & L Series)
PID : 00h 00h
Size : 00h 11h (17 Bytes)
- 00h FFh…FFh
(sixteen “FFh”s)
- XXh XXh…XXh
Default * (For example: F680BT-012E)
User defined
(See Notes)
Bluetooth PIN Code
PID : 00h 01h
Size : 00h 09h (9 Bytes)
- 30h…30h 00h
(eight “30h”s)
- XXh XXh…XXh
Defaults to “00000000”
User defined
(See Notes)
BT Authentication
PID : 00h 02h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable
Enable *
Sleep Timeout Control
PID : 00h 03h
Size : 00h 02h (2 Bytes)
1
st
Byte
- 00h
- 06h
- XXh
2
nd
Byte
- 00h
- 01h
- XXh
Sleep Timeout of Connect State
Never enter sleep mode
6 (x5) minutes *
User defined 0~99 (x5) minutes
Sleep Timeout of Disconnect State
Never enter sleep mode
1 minute *
User defined 0~99 minutes
Link Supervision Timeout
PID : 00h 04h
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
- 03h
- 04h
1 s
3 s *
5 s
7 s
9 s
HID Link Quality Setting
PID : 00h 05h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable
Enable *
Bluetooth Power Saving Mode
PID : 00h 06h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
Variable PIN Code
PID : 00h 07h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable *
Enable
. Notes
1. User Defined Bluetooth Device Name is a maximum 16-character name, which is followed by a 00h .
If the device name is less than 16 characters, the rest should be set to FFh. For example, if the
name is “BT-1”, this parameter should be “42, 54, 2D, 31, 00, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF,
FF, FF”
2. User Defined Bluetooth PIN Code is a maximum 8-character name, the PIN Code is followed by a
00h . If the PIN Code is less than 8 characters, the rest is filled with FFh. For example, if the PIN
code is “1234”, this parameter should be “31, 32, 33, 34, 00, FF, FF, FF, FF”