Cino FA470 - Manual (Page 29)

Command Descriptions
2-14
Capture Image Ready Notify
(TS)
Descriptions
Capture image ready notify.
When an image is captured by scanner and ready to be retrieved by host, this command will be sent
as a notification.
Available for A series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 0Fh 1Ah 00h 00h 00h 00h 15 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes 0 Byte 1 Byte 1 Byte
. Host Requirements
Since Capture Image Ready Notify is a device-to-host message, there is no response for this message.
. Parameter(s) Field
Capture Image Ready Notify takes no parameters, so the Parameter(s) field is null.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”