Cino FA470 - Manual (Page 201)

Command Descriptions
2-186
Reply Transmission
(WF)
Descriptions
Reply the desired one or more parameters of the Transmission settings as well as DataWizard
Premium parameters including Data Script Active Setting, Data Script Setting, Security Script
Setting and Data Wizard Premium Error Message.
Reply Transmission is sent by the device in response to the Get Transmission command. It sends
the values for all the desired parameters requested in the Get Transmission command.
Available for F & L series
Note that DataWizard Premium parameters are only available for Scanners that support
DataWizard Premium. For more details about DataWizard Premium, please refer to FuzzyScan
DataWizard Premium User Manual.
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 0Dh 00h 00h 00h Variable See Below Variable 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes Variable 1 Byte 1 Byte
Parameter(s)
First Parameter ……… Last Parameter
PID Size Options ……… PID Size Options
2 Bytes 2 Bytes Variable ……… 2 Bytes 2 Bytes Variable
See Next Page
. Host Requirements
Since Reply Transmission is a device-to-host message, there is no response for this message.
. Parameter(s) Field
Reply Transmission can change multiple parameters at one time, so it takes compound parameters.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
. Size
Total size (bytes) of the Options field