Cino FA470 - Manual (Page 160)

Command Descriptions
2-145
Reply BT Operation
(BT)
Descriptions
Reply the desired one or more parameters of the Operation Settings for Bluetooth Scanner
Reply BT Operation is sent by the device in response to the Get BT Operation command. It sends
the values for all the desired parameters requested in the Get BT Operation command.
Available for F, L & A series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 0Ah 00h 00h 00h Variable See Below Variable 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes Variable 1 Byte 1 Byte
Parameter(s)
First Parameter ……… Last Parameter
PID Size Options ……… PID Size Options
2 Bytes 2 Bytes Variable ……… 2 Bytes 2 Bytes Variable
See Next Page
. Host Requirements
Since Reply BT Operation is a device-to-host message, there is no response for this message.
. Parameter(s) Field
Reply BT Operation can change multiple parameters at one time, so it takes compound parameters.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
. Size
Total size (bytes) of the Options field