Bimba IntelliSens - Manual (Page 25)

IntelliSense ® Manual
25
7. The software will show a message indicating success and the SIM will appear in the Cylinder list as “un-
known” and the full port address that was previously selected.
Figure 12: Unknown cylinder
8. Select the “Status” tab on the left of the screen. The cylinder status list will show, and the newly registered
SIM will have a status of “ID X not specified”.
Multiple SIMs
Multiple SIMS can be added to a Data Gateway by following the steps to add a single SIM. It is recommended that
each SIM is connected to the Data Gateway individually and given a distinguishing name (see editing SIM configura-
tion) and then adding the remaining SIMs. The figure below shows a Gateway with three SIMS connected.
Figure 13: Multi-SIM Dashboard