Austin Hughes X-600 Smartcard Handle User Manual
Page 64
www.austin-hughes.com
UM-X-600-ISM-Q214V2
P.59
To assign authority to User group, please take the steps below :
1. Select the group
2. Click “ Edit “
3. Tick the user( s ) you want to assign to the group
4. Tick the Control Area( s ) you want the group to control & monitor
5. Assign appropriate “ Setup “ , “ Device Confi guration “ , “ System & Device Log “ authority to the group
6. Select one of the time rule in “ Time Access Setting for User Group: “
Assign group authority
5
6
7
8
4
3
7.
Tick “ SmartCard Access “, otherwise the group user CANNOT access the cabinets by smartcard
( Default : untick )
8.
If you want the group user can NOT access the software out of the time rule,
please tick “ Remote System Login “
( Default : untick )
9. Click “ Save “ & “ Yes “ in the warning window to fi nish Group authority assignment
1. Select the group you want to delete
2. Click “ Delete “ & Click “ Yes “ to fi nish.
The deleted group’s users will be moved to the
unassigned user list simultaneously.
Delete group