Austin Hughes X-600 Smartcard Handle - Manual (Page 43)

www.austin-hughes.com UM-X-600-ISM-Q214V2 P.38
< 8.1 > Key Word
- An actual cabinet fl oor plan.
- Only in MFP, you can create cabinet & confi gure the IP setting for the cabinet.
- If you want to monitor & control cabinets & their devices, you need to build the control area.
- MFP can be more than one. No. of MFP is subject to the site scale & plan by fl oor, zone, building, branches
or remote sites.
MFP - Master Floor Plan
- Time rule is designed for security. It tries to restrict the users with a time period to access the system and cabinet.
- In system setup section < 11.5 >, you can set time rules up to 32.
- Afterward, all time rules will be shown in user group for their selection.
- Only one time rule can be assigned to one user group.
Time Rule
- There is a button in MFP - CA Loading. It is to provide a quick and effi cient path for the user to move cabinet
to build the control area.
CA Loading
- You can build a Control Area for some specifi c cabinets which you want to monitor, confi gure & control.
- All cabinets in the CA should be loaded from the MFP by CA Loading button.
- CA can be more than one. How many CA is subject to your plan.
- CA has 2 modes : Edit mode & View mode.
- Under Edit mode, you can confi gure not only cabinets but also devices such as PDU, fan unit & sensors.
- View mode is designed for users with limited authority so they can ONLY monitor the status of cabinet & device.
CA - Control Area
- To build a user list. Afterward, you can use the list to build the user group.
- Each user has his own login name & password for remote system login.
- Each user also has his own smartcard for cabinet access.
- However, before users join a user group in next step, they can do nothing.
User Setup
- You can form a user group from the user list.
- You can defi ne the user group with authority and which control area / areas to monitor & access.
- Each user subordinated to ONLY ONE user group.
- If the user wants to join another user group, a new login name, password & smartcard MUST BE assigned.
- Each user group must select ONE time rule. All group users can access the cabinet and remote system login
according to the time period of the selected time rule.
- Without time rule assignment, all group users can do nothing.
User Group