2 > fan unit – Austin Hughes X-600 Smartcard Handle User Manual
Page 28
www.austin-hughes.com
UM-X-600-ISM-Q214V2
P.23
Using dip switch no. 1, 2, 3, 4, 5, 6 & 8 to setup each FAN unit level as below :
Cascaded
FAN unit
Dip switch no.
1
2
3
4
5
6
8
1st level Fan Unit
On
On
On
On
On
On
Off
2nd level Fan Unit
Off
On
On
On
On
On
Off
ON
OFF
Dip switch 7
Enable
On
Disable
Off
Using dip switch no. 7 to setup each FAN unit audio alarm as below :
If enable the audio alarm, the buzzer will
sound when the outside temperature is
over the preset alarm temperature.
InfraBox X-2000
OUT
OUT
1st level Fan unit
LINK
LINK
2nd ( last ) level Fan unit
Cat 5 / 6 cable
Up to 20M
Under an
InfraSolution X
network, each InfraBox supports
InfraCool
remote fan unit x 2 in a daisy chain.
Each fan unit comes with TEMP. sensor port x 1
Max. daisy chain distance from InfraBox to the 2nd fan unit up to 40M
Please visit below link to select desired Fan unit models
http://www.austin-hughes.com/solutions/intelligent-fan-units.html#RMounted
< 3.2 > Fan Unit