Austin Hughes X-600 Smartcard Handle - Manual (Page 58)

www.austin-hughes.com UM-X-600-ISM-Q214V2 P.53
1. Select the MFP you want to edit
2. Click “ Edit “
3. Edit the MFP title / Description
4. Click “ OK “ to fi nish
< 10.2 > MFP - Master Floor Plan
Add MFP
Edit MFP
1. Click “ MFP “ tab
2. Click “ Add “
3. Input the MFP title & Description
( min. 1 char / max. 32 char )
4. Click “ OK “ to fi nish
- An actual cabinet fl oor plan.
- Only in MFP, you can create cabinet & confi gure the IP setting for the cabinet.
- If you want to monitor & control cabinets & their devices, you need to build the control area.
- MFP can be more than one. No. of MFP is subject to the site scale & plan by fl oor, zone, building, branches
or remote sites.
Ensure ONLY one user confi gures the cabinet IP in the same MFP at the same time