ADLINK Express-CVC - Manual (Page 48)

Page 48 Express-CVC
6.3.2. ACPI Settings
Enable APIC Auto Configuration
BIOS ACPI Auto Configuration. Set this value to Enabled/Disabled.
Enable Hibernation
Controls system's ability to hibernate (OS/S4 Sleep State). Set this value to Enabled/Disabled.
ACPI Sleep State
Select the highest ACPI sleep state the system will enter, when the SUSPEND button is pressed. Set this value to Suspend Disable, S1, S3,
Both S1 and S3.
S1 only(CPU Stop Clock)
CPU Stop Clock - Under this setting the system enters a low power state instead of being completely shut off. This allows the
computer system to boot up in a few seconds.
S3 only(Suspend)
Suspend to RAM - Under this setting the system enters a low power state instead of being completely shut off. This allows the
computer system to boot up in a few seconds.
Emulation AT/ATX
Select Emulation AT or ATX function.If this option set to [Emulation AT], BIOS will report no suspend functions to ACPI OS. In Windows XP,
it will make the OS show a shutdown message during system shutdown.