ADLINK ACL-6128A - Manual (Page 23)

Installation • 15
2.7 Current Sink Range Setting
In addition to voltage output, the ACL-6128A also provides either 0-20mA
or 4-20mA current sink. In order to use the current sink range, set the
output voltage to unipolar. Jumper JP6 corresponds to CH1 and JP10 is
used with CH2. Figure 2.7 shows the settings for the ACL-6128A current
sink range.
Channel No.
4-20mA
( Default )
0-20mA
CH1
JP6
0
4
JP6
0
4
CH2
JP10
0
4
JP10
0
4
Figure 2.7 Current Sink Setting
Note : The current sink can ONLY be used when the output voltage range set
as internal reference with -5V and unipolar mode.