Datavideo MP6000MD - Manual (Page 9)

8
Pause/Play a Title/Track
Press Title button, it will go to the track list of the disc. Press it again; it will go back to
the video clip you were playing.
Jump to Previous track (Title)
“MENU” KEY has several different functions,
1. VIDEO INPUT:
Input Source Select of Composite Video, S­Video, YUV, Digital(DV25) Please note,
system will take about 2­3 seconds to switch between video sources.
2. COLOR CORRECTION:
To adjust Brightness, Contrast, Color, and Tint (Tint is NTSC only)
3. GPI FUNCTION:
To set up GPI trigger modes, Record/Pause or Play/Pause with the setting in rear
panel DIP SWITCH.
When GPI DIP SWITCH is set to OFF, there are two different functions
a. Press GPI TRIGGER BUTTON once, will start RECORDING. Press it again will
PAUSE recording.
b. Press GPI TRIGGER BUTTON once, will start playback. Press it again will PAUSE
playback.
When GPI DIP SWITCH is set to ON, there is only one function
a. Press and hold GPI TRIGGER BUTTON will start to RECORD. Release GPI
TRIGGER BUTTON will PAUSE recording.
4. VIDEO STANDARD:
Select video output as NTSC 0, 7.5 IRE or PAL
5. RECORD QUALITY:
HQ, SP, LP, EP, SLP