Datavideo MP6000MD - Manual (Page 42)

41
After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.
On the TV monitor you will see this message
After about 20 seconds the message will disappear and the disc is ready to use.
Erasing a DVD+RW Disc
If you have an old DVD+RW Disc that you want to re­record as a new disc, i.e. you wish to remove all
previously recorded tracks and data from the disc, follow this procedure.
Press the Eject button, the message OPEN will be displayed on the LCD display, and the disc tray will
open.
Place a DVD+RW disc on the disc tray; label/printed side up.
Press the Eject button again, so that the tray retracts, and the CLOSE message appears.
After a few seconds the message will change to READING, and after a few more seconds it will return to
the general display.
Press the Erase button and the Erase menu will appear.
Press the Right Arrow button to highlight CONFIRM
Press the Enter button to confirm and the LCD Display will show
the ERASE message
On the TV monitor the Erase Progress bar will appear and after a
few seconds will disappear
Once erase has been completed the LCD Display will return to the
General Display