Datavideo MP6000MD User Manual
Page 17
16
Note: While finalizing the disc, all buttons on the front panel are inactive. Do not turn off
the power, during finalization as disc damage may occur.
If unable to finalize the disc, press the “TITLE”, “STOP”, and then “FINALIZE’” buttons to
finalize the disc.
Step 14: “ERASE” the disc: This function is only used in DVD+RW discs. It can not be used with
DVD+R disc. DVD+RW disc can be recorded and erased repeatedly.
If there is any error and the recording needs to be erased, there are two different methods to do
it.
a. Erase the entire “Title” (Track) in DVD+RW disc.
Press “ERASE” button, the entire disc will be erased in about 20 second.
b. Erase the last track in DVD+RW disc.
Press “TITLE” button, then press “MENU”. Go to “2. ERASE LAST TITLE”, and choose
“CONFIRM”. Then press “ENTER” button again.
You can follow this procedure to erase the previous track.
Note: If the DVD+RW disc has been closed (made compatible), you can only erase the entire
disc, not the last track.