Datavideo MP6000MD User Manual
Page 38
37
To access other options press the Down Arrow button to select
Contrast, Color and Tint (Tint is NTSC only)
The procedure for setting Contrast, Color and Tint (NTSC only) is the same as for Brightness.
Once all the adjustments are correct, press the Menu button to
exit the Color Correction menu and return to the General
Display
These color correction settings will be stored as your default settings for the unit.
If you wish to return to the factory default at any point, follow the above procedure but highlight DEFAULT
and press the Enter button, then highlight SAVE and press the Enter button again.