Datavideo MP6000MD - Manual (Page 11)

10
Functions: Rear Panel
DIP switch
DIP switch 1 OFF,
•External device control by GPI trigger.
DIP switch 1 ON (When this function is turned on, the front
panel and GPI function will be disabled. Only “EJECT” will
work.)
•External device control enabled (by RS­232)
DIP switch 2 OFF
•GPI function is set to Pulse Trigger.
DIP switch 2 ON
•GPI function is set to Level Trigger.
Note: Please make sure the unit is turned off before changes
to DIP switch.
RS­232 Remote Control interface
• 9­pin serial port standard RS­232 interface
• With additional PC remote software to remote control MP­6000MD.
AC Power connector with 1 Amp Anti­Surge Fuse
Connect to a suitable AC outlet (100 – 240 Volt AC).